Advantages of aluminum tanker trailer

Comparative advantages of aluminum tanker trailer and steel semi trailer

Development trends and characteristics of Oil Tanker Trailer

 

Advantages of aluminum tanker trailer

Aluminum has been used in vehicles for a long time. By the 1960s, aluminum had begun to be used in vehicles. Large-scale application in automobiles. Today, carbon steel tankers in developed countries such as Europe, the United States, Australia, and Japan have basically been eliminated, and aluminum tanker trailers have been adopted instead.

Carbon steel tankers are easily corroded when loaded with gasoline and diesel. The inside of the tank is prone to rust, which causes the oil to be contaminated, which in turn leads to early wear and tear of the vehicle engine, which greatly reduces the service life of the engine.

The use of aluminum tanker trailer can not only greatly reduce the vehicle's own weight and improve transportation efficiency, but also has a long service life, which is 5-10 years longer than that of steel tanker. During the entire life cycle, the profits created are very considerable.

Aluminum Tanker Trailer for Sale | Price and Advantages of Aluminum Fuel Tanker

1. Lightweight car body, more economical and practical

The density of aluminum alloy is small, and the large cross-section beam is extruded at one time, and the strength is high. Lighter than similar steel tankers

More than 4 tons, 20% more than steel tankers. As the aluminum tanker trailer is lighter than the carbon steel tanker,

It reduces fuel consumption and tire wear during transportation, thereby reducing daily operating costs and maintenance costs. By reducing the weight of the vehicle body and increasing the payload, transporting the same amount of goods can reduce the number of shifts in the vehicle.

2. Strong corrosion resistance, improve the service life

Aluminum alloy and most chemical media and food such as acetone, benzene, gasoline and diesel, kerosene, glacial acetic acid, etc.

The product has good compatibility, and the transportation range is wider than that of the cross-border; low related maintenance cost, no anti-corrosion surface metal treatment is required, the body will not rust when scratched, the appearance is durable, and it is easy to clean. 15-20 years is the typical service life of 3 axle aluminum tanker trailer.

According to the statistics of the user experience of American HEIL company in the global market for decades of sales customers, the average life of the aluminum tanker trailer is about 10 years, depending on the customer's use and maintenance status. The longest service life of the aluminum tanker semi trailer has reached 40 years.

Tri Axle Aluminum Fuel Tanker Trailer Price

3. Good ductility, improve safety and eliminate hidden dangers

The tank body is made of aluminum alloy profile, which has good elongation rate and high strength. Oil is flammable and explosive

Therefore, safety is an important indicator for considering tank trucks. Oil products are prone to thermal expansion and contraction in extremely cold or extremely hot conditions. Ordinary tank trucks have poor ductility and easily explode in this environment. The use of 45000 litersaluminum fuel tanker trailer greatly improves safety.

4. Recyclable and high recovery rate

Aluminum has a very high recycling value. A tank made of 5t finished aluminum will be reported to the tanker.

At the time of waste, according to the current price of aluminum in the international market, the recovery of the can body alone will cost about 80,000 yuan. This virtually saves the company's operating costs.

5. Aluminum tanker trailer is an environmentally friendly vehicle, and the lightweight of aluminum tanker trailer means lower

The fuel consumption and pollutant emissions of the car also mean that it is environmentally friendly because the exhaust contains a large amount of carbon dioxide, which is a major source of pollution to the environment, so the application of aluminum alloy materials contributes to environmental protection.

6. Aluminum alloy has good electrical conductivity

effectively reducing the accumulation of static electricity on the tank. When hair No sparks will be generated during collision or tipping, eliminating the hidden danger of fire or explosion.

45000 Liters Aluminum Tanker Truck Trailer with Best Price

Comparative advantages of aluminum tanker trailer and steel semi trailer

Resource consumption and environmental pollution have become global issues, and the whole society is paying attention to the energy-saving and emission-reduction work of automobiles. Measures such as reducing the weight of tanker trailers, reducing fuel consumption, and improving transportation efficiency have become common concerns for governments, scientific research units, vehicle manufacturers, and transportation users. Aluminum is the second largest metal after steel.

Aluminum alloy has a series of excellent characteristics, such as low density, lightweight, high strength, good elasticity, good impact resistance, corrosion resistance, easy surface coloring, and good processability. As well as high recyclability, etc., it has gradually been widely used in the automotive industry.

Due to the large-scale use of aluminum alloys in automobile manufacturing to reduce the total mass of automobiles, thereby reducing fuel consumption; due to low fuel consumption, lightweight, fewer exhaust emissions from automobiles, and less pollution; the recycling rate of scrap automobiles is high, and aluminum automobile parts Basically all can be recycled; less energy is needed for recycling and regeneration, and aluminum can be recycled multiple times. Therefore, whether it is internationally or domestically, tri axle aluminum tanker trailer will occupy an important stage in the future.

Factory Show of 3 Axle Aluminum Tanker Trailer

Development trends and characteristics of Oil Tanker Trailer:

1. Lightweight

There are three main directions for the lightweight development of tanker trailer: one is the use of lightweight materials in manufacturing; the second is to optimize the design of the structure; the third is to innovate the manufacturing process; it seems that the first direction is more powerful Potential, the automotive industry, which has become the mainstream of the lightweight of special aluminum tanker trailer for sale, generally adopts the method of developing lightweight materials to realize the lightweight of automobiles.

There are now a variety of lightweight materials used in the automotive manufacturing industry. In summary, these materials can be divided into two types, one is low-density materials, such as magnesium alloys, aluminum alloys, titanium alloys, plastics and composite materials, etc.; the other is high-strength materials, such as high-strength steel and high-strength stainless steel. The application of high-strength steel can greatly reduce the weight of the structure. Some can reach 25%.

With the continuous deepening of the application of lightweight materials, the research level of mechanism optimization and modularization of parts and components has also been continuously improved. Corresponding automobile molding methods and connection technologies have also been continuously innovated

Details of 45CBM Aluminum Tanker Trailer

2. Heavy-duty, multi-axis

The rapid growth of 3 axle aluminum fuel tanker chassis types fully proves the development trend of heavy-duty special vehicles. The continuous improvement of domestic road conditions, especially the rapid construction and development of expressways, provides favorable conditions for high-speed road transportation, and also provides space for the development of large-tonnage, multi-axle, and high-power tank semi-trailers. . At the same time, the rapid development of the domestic logistics industry and air transportation industry also urgently requires the development of large capacity and high power tank semi-trailers.

3 The types of materials used are becoming more and more abundant

The research and application of new materials have received more and more attention. Acid-base, high-strength, and good welding performance materials are increasingly used in oil tank semi-trailers.

 

 

You can learn about different types of fuel tanker semi trailers (like 3 axle fuel tanker, 4 axle storage tanker trailer, stainless steel tanker trailer, acid tanker trailer, fuel tanker with flatbed trailer, fuel tank Full trailer). And the process, testing, packaging and customer feedback, etc.